How to Make a Removable Dollhouse Accent Wall With Fabric Wallpaper and Batten
I love a good accent wall, but I am not great at committing to one. So when I wanted to add batten and wallpaper to my dollhouse, I made the whole thing removable. Both the wallpaper and the batten boards slide right onto the back wall, which means if I change my mind later (and let’s be honest, I might), I can just swap it out. Here’s exactly how I made mine. I filmed the whole thing too, you can watch it below.
This post includes affiliate links and if you click and make a purchase, I might earn a small commission (at no extra cost to you), which helps me keep creating and sharing projects like this. View my full list of tools and materials I use for my dollhouse project here.
What You’ll Need
- 3mm basswood (or foam board, chipboard, or mat board)
- xTool M2 laser cutter (optional)
- Fabric for the wallpaper (I used a floral print)
- Mod Podge, plus satin Mod Podge for the batten
- Scrap poster board
- A paintbrush
- Scissors or a craft knife
- Cricut scraper tool (or an old gift card)
- A pencil for tracing
- Magazines or heavy books for weighing it down
Shop my Amazon Storefront for more dollhouse tools and supplies.
Design and Cut the Batten
Start by measuring the wall where your accent wall is going. I used those measurements to design the batten panels in xTool Studio, then cut them out of 3mm basswood on my M2.
If you don’t have a laser cutter, don’t worry! You can absolutely do this by hand. Use mine as inspiration and cut your own batten strips from foam board, chipboard, or even mat board. Mat board especially gives you a nice clean edge, kind of like a picture frame.
Give the Batten a Little Sheen
My batten was the same color as the wall, which looked a little flat. To give it some contrast without changing the color, I brushed on a coat of satin Mod Podge. It adds just enough sheen to make the trim read as its own layer.
Why I Added Wallpaper (and Made It Removable)
After I added my removable stair landing railing, I stepped back and realized everything was blending together. Too much of the same color. So I decided to test out wallpaper behind the batten.
I didn’t want to glue anything straight onto the house in case I didn’t like it, so I made the wallpaper its own removable panel too. Honestly, this is my favorite trick for trying out a look without the commitment.
Make the Fabric Wallpaper Panel
Lay your batten on a scrap piece of poster board and trace around it. Cut the poster board out so it’s the exact same size as the batten. Then cut your fabric to fit the poster board.
Brush a generous layer of Mod Podge onto the poster board and lay the fabric on top. I didn’t add Mod Podge on top of the fabric because I wanted to keep the woven texture. My fabric is a floral print, so it’s not as strict as a geometric pattern, but the design still has a direction to it. Take a second to line it up as straight as you can before it sets.
Then use a Cricut scraper tool to smooth the fabric down and really press it into the Mod Podge. This gets rid of bubbles and helps the fabric stick evenly. You could also use anything with a straight edge to smooth, like a credit card.
Weigh It Down While It Dries
Full honesty, this was my first time using fabric and Mod Podge as a wallpaper alternative, and I was a little nervous about how it would react lolz. Since the panel isn’t attached to the dollhouse, there’s nothing holding it flat. So I weighed everything down with a stack of magazines and let it dry completely.
Good news: it dried perfectly flat. Woohoo!
Slide It In and Layer the Batten
Once the panel was dry, I slid it into the dollhouse. The wallpaper looked great on its own. I could’ve stopped right there and added a little trim along the edges to a finished look, but layering the batten on top is what really made it for me. The colors tie in with the rest of the room, everything feels more cohesive, and it adds that extra layer of detail that makes you want to look a little closer.
And the best part? If I ever change my mind about the wallpaper, I can just pull it out and swap in something new.
Tips for Your Own Removable Accent Wall
- Trace your wallpaper panel from the batten itself so the two pieces line up perfectly.
- Thinner fabrics with small prints look the most realistic at 1:12 scale.
- Don’t skip the weighing step. Poster board can curl as Mod Podge dries.
- Make a couple of fabric panels so you can switch up the look seasonally.
If you try this, I’d love to see it! Share your accent wall in the Collective.
Build alongside us in Lina’s Dollhouse Collective
If this build feels lonely, that is exactly what the Collective is for. Lina’s Dollhouse Collective is the Facebook group where we share ideas, put the free tools to work as part of our process, and cheer each other on through every glued finger and crooked shingle.
Inside the group you can ask the questions you do not want to post publicly, show off a build at any stage (the messy ones too), and pick up tricks the rest of us learned the hard way. We talk scale, paint, wiring, sourcing, kits, scratch builds, and yes, snack recommendations for long glue-drying breaks.
Bring your tools. Bring your scale ruler, your color palette, and your scale conversions. Bring your wins and your roadblocks. We will meet you there.

Join the Collective
Stay up to date & receive the latest posts in your inbox.
Privacy Policy