How I Primed My Dollhouse Walls
Okay… this is one of those steps that doesn’t look like much in photos, but it makes everything after it so much better. Once I had my walls lined and all my tape wire hidden, the next thing I needed to do before any color went on was prime.
If you haven’t covered your wiring yet, start there first. I walk through that whole process in How I Use Grandmother Stover’s Paste to Hide Tape Wire, where I use liner paper and paste to get a smooth surface over all those wires. Priming is the very next step, and it’s what gives you a clean, even base so your paint actually looks the way you want it to.
Why Prime at All?
Here’s the thing. Liner paper soaks up paint like crazy, and raw or papered walls can end up looking blotchy if you skip this part. Priming seals the surface, evens everything out, and means you’ll use way less of your actual paint color later. It’s a little extra time up front that saves you a lot of frustration down the road.
Materials
Want to see everything I use for my builds in one place? You can browse my full Amazon Storefront here.
Step-by-Step
- Make sure your liner is fully dry. If you just finished applying your liner paper with paste, give it plenty of time to dry completely before you prime. Priming over damp paper will just cause bubbling and warping.
- Work one wall at a time. Just like with lining, I focus on painting one wall or section so I can keep my coverage even and catch any spots I missed.
- Roll the big areas first. I use a mini roller to lay down a thin, even coat across the open wall space. Thin is the keyword here, you want light coats, not one thick gloopy one.
- Cut in the edges and corners. Switch to a hand brush to get into the corners, along the trim lines, and anywhere the roller can’t reach cleanly.
- Let it dry, then do a second coat. One coat usually isn’t enough over liner paper. Let the first coat dry completely, then go back over everything for a smooth, fully sealed surface.
- Check for blotchy spots. Once it’s dry, hold the house up to the light and look for any thin or uneven areas. Touch those up before you move on to your paint color.
And that’s it! Once your primer is dry and even, you’ve got the perfect base to start adding color, wallpaper, or whatever look you’re going for. It’s amazing how much more “finished” the walls feel after this one step, even before any real color goes on.
If you found this helpful, make sure to subscribe and follow along, because I share dollhouse builds, tutorials, and all the little tips and tricks I pick up along the way.
Build alongside us in Lina’s Dollhouse Collective
If this build feels lonely, that is exactly what the Collective is for. Lina’s Dollhouse Collective is the Facebook group where we share ideas, put the free tools to work as part of our process, and cheer each other on through every glued finger and crooked shingle.
Inside the group you can ask the questions you do not want to post publicly, show off a build at any stage (the messy ones too), and pick up tricks the rest of us learned the hard way. We talk scale, paint, wiring, sourcing, kits, scratch builds, and yes, snack recommendations for long glue-drying breaks.
Bring your tools. Bring your scale ruler, your color palette, and your scale conversions. Bring your wins and your roadblocks. We will meet you there.
Join the Collective
Stay up to date & receive the latest posts in your inbox.
Privacy Policy